Skip to Content

Bellino Brushed Nickel Wall Bath / Spout

Solid brass wall-mounted bath spout with a brushed nickel finish. Designed for installation above a bath or in a shower area.

Installation Wall Mounted
Material Solid Brass
Finish Brushed Nickel
SKU / Code 40924 / 40924
258.18 258.18
284.00

  • Color

Barcode: 40924
Barcode 40924

MyDepot product guide

Bellino Brushed Nickel Wall Bath Spout

Solid brass wall-mounted bath spout with a brushed nickel finish. Designed for installation above a bath or in a shower area.

Installation Wall Mounted
Material Solid Brass
Finish Brushed Nickel
SKU / Code 40924 / 40924
Quick check before ordering
Confirm spout reach suits your bath or shower configuration. Check wall rough-in and outlet position before installation. Verify water inlet position matches your plumbing. Confirm finish matches other bathroom fittings. Use a licensed plumber for final installation.

What is included

Included Wall bath spout unit
Not included Installation service and site preparation are not included unless stated separately.
Best for Wall mounted bath and shower areas requiring a single water outlet spout.

Measure before you buy

  1. Measure the spout reach from the wall to confirm it clears the bath edge.
  2. Check the wall cavity depth for the water inlet pipe.
  3. Verify the centre-to-centre outlet position.
  4. Allow adequate clearance around the spout for hand shower use if applicable.
  5. Confirm the wall finished surface will align with the spout flange.

Complete specifications

Product type Wall Spout
SKU 40924
Code 40924
Material Solid Brass
Colour / finish Brushed Nickel
Mounting Wall Mounted
Barcode 40924

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Clean with a soft cloth and mild non-abrasive cleaner.
  • Avoid acidic or abrasive cleaning products that may damage the brushed nickel finish.
  • Do not use scouring pads or harsh chemicals on the surface.
  • Periodically check the wall flange seal to prevent water ingress.

FAQ

What is the water flow rate of this spout?

Flow rate details are subject to WELS registration. Please check the product packaging or contact support for the specific WELS rating and litres per minute.

Does this spout include a diverter for switching to a hand shower?

This is a wall spout only. If you need a hand shower diverter, select a compatible diverting tap or add a separate diverting valve.

Is this spout suitable for bath and shower use?

This wall spout is designed for wall mounted installation above a bath or in a shower area. Confirm the spout reach and outlet position suit your application.

Specifications

Color Brushed Nickel