Skip to Content

410*410*140mm Counter-Top Circular Black/White Basin

A compact circular ceramic basin with a black and white two-tone finish. Designed for counter-top installation with visible waste.

Size 410 x 410 x 140mm
Installation Counter-top
Material Ceramic
Finish Black and white
500.00 500.00
550.00


Barcode: 50060
Barcode 50060

MyDepot product guide

410x410x140mm Counter-Top Circular Black/White Ceramic Basin

A compact circular ceramic basin with a black and white two-tone finish. Designed for counter-top installation with visible waste.

Size 410 x 410 x 140mm
Installation Counter-top
Material Ceramic
Finish Black and white
Quick check before ordering
Confirm benchtop support for above-counter basin. Check waste outlet accessibility below bench. Verify tap reach and mixer height. Confirm two-tone finish matches design.

What is included

Included Basin only.
Not included Installation service and site preparation are not included unless stated separately.
Best for Compact bathroom or powder room benchtops where the basin sits above the counter surface.

Measure before you buy

  1. Measure benchtop width and depth for the 410mm basin.
  2. Confirm waste outlet position below the bench.
  3. Check clearance for mixer tap installation above the basin.
  4. Allow space for the basin to sit clear of walls or splashbacks.
  5. Confirm compatibility with your vanity or bench unit.

Complete specifications

Product type Counter-top basin
SKU 50060
Code 50060
Size 410 x 410 x 140mm
Material Ceramic
Colour / finish Black and white
Mounting Counter-top
Barcode 50060

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Clean with a soft cloth and mild non-abrasive cleaner.
  • Avoid acidic or harsh chemical cleaners on the ceramic surface.
  • Do not use abrasive scouring pads or powders.
  • Check and maintain seals around the basin edges periodically.
  • Use a licensed plumber for installation to ensure correct sealing.

FAQ

Does this basin have a taphole pre-drilled?

The listing does not specify a pre-drilled taphole. Please confirm taphole requirements with your installer or supplier before ordering.

What waste size does this basin use?

Standard basin wastes are typically 32mm or 40mm. Confirm the waste size required for your plumbing before ordering.

Is this basin suitable for undermount installation?

This basin is listed as counter-top. Confirm the installation type with your installer before purchasing.