Skip to Content

600*900mm Arch Gunmetal Framed LED Mirror 3 Color Lighting With Touch Sensor Switch

Confirm power and fixing requirements Mounting hardware, power leads, and installation are not included. Use a licensed electrician for installation.

Arched LED mirror with gunmetal frame and 3 colour lighting. Adjustable via touch sensor switch for bathroom task lighting.

Size 600 x 900mm
Installation Wall mounted
Material Aluminum frame
Finish Gunmetal
1,368.18 1,368.18
1,505.00


Barcode: 42149
Barcode 42149

MyDepot product guide

600x900mm Arch Gunmetal LED Mirror with Touch Sensor

Arched LED mirror with gunmetal frame and 3 colour lighting. Adjustable via touch sensor switch for bathroom task lighting.

Size 600 x 900mm
Installation Wall mounted
Material Aluminum frame
Finish Gunmetal
Quick check before ordering
Confirm mounting type and fixing requirements with your installer. Check wall fixing support for the mirror weight. Verify power access for the LED and sensor features. Confirm whether hardwiring or plug-in connection applies. Use a licensed electrician and installer.

What is included

Included Mirror unit with touch sensor switch.
Not included Installation service and site preparation are not included unless stated separately.
Best for Bathroom walls where the arch design and adjustable 3 colour task lighting are useful.

Measure before you buy

  1. Confirm the arch height clears the vanity or shelf below.
  2. Verify the 600mm width fits the available wall space.
  3. Check the mounting height for comfortable use.
  4. Confirm stud or structural support positions for fixing.
  5. Check power access for the LED and sensor features.

Complete specifications

Product type LED Mirror
SKU 42149
Code 42149
Size 600 x 900mm
Material Aluminum frame
Colour / finish Gunmetal
Mounting Wall mounted
Barcode 42149

Factory-direct confidence

MyDepot focuses on practical bathroom and home products with clear specifications and direct value. The goal is simple: make the renovation decision easier, not louder.

Care and installation notes

  • Wipe the mirror surface with a soft microfibre cloth.
  • Avoid abrasive or solvent-based cleaners on the frame.
  • Check electrical connections periodically.
  • Keep moisture away from the touch sensor area.
  • Use only a dry or lightly damp cloth on the sensor.

FAQ

How do the 3 colour lighting modes work?

The touch sensor switch cycles through 3 colour temperature modes. Cycle through each mode by tapping the sensor area.

Does the arched shape affect installation?

The arch shape means the mounting bracket may require offset fixings depending on the wall stud positions. Confirm fixing positions before drilling.

Is the gunmetal frame finish suitable for wet areas?

The frame is finished in gunmetal coating. Keep the frame dry and wipe clean with a soft cloth. Avoid abrasive cleaners that may damage the coating.